Use a weatherproof and UV resistant sealant to get a beautiful, clean finish around the exterior window joint. The Soudal’s neutral weather silicones are a flexible and weathertight sealant, perfect for sealing around the perimeter of wooden, aluminium, and PVCu window and door frames. Find out how to do this in our step-by-step guide.
Remove all dirt, grease and dust. Use a good quality degreaser around the window frame. First, brush the wall clean to remove any dust and dirt. Then go over it with a damp cloth. Allow drying thoroughly.
Use masking tape to neatly tape off the sealant edges. You will then work nice and straight. Make sure that the joint, both on the wall and on the window frame, is between 5 and 10 millimeters wide.
Cut the top off the cartridge with a safety cutter. Turn the nozzle on top and cut the end to a slant. To get the best result, cut the opening of the nozzle to the same size as the joint you want to seal. Put the cartridge in the caulking gun and squeeze the handle until sealant appears.
Place the nozzle where you want to start sealing. Squeeze the handle and move the caulking gun over the joint in a smooth movement. Apply sufficient sealant to ensure that the product adheres well.
Wet your finger in the soap solution or Joint Finish. Smooth the joint and immediately remove the masking tape. Smooth carefully again to smooth away any protruding edges.
Use the plant sprayer with clean water to remove soap residues. You then prevent soap from burning into the window frame.
You can find the technical sheet and all information about the use, shelf life, composition of Soudal sealants visiting the product page.